Trung tâm báo cháy 8 vùng UNIPOS PS4000-8

Mô tả sản phẩm Trung tâm báo cháy 8 vùng UNIPOS PS4000-8

Fire control panel FS4000/8 is designed to operate with conventional automatic fire detectors and manual call points. The panel has outputs provided for external executive devices.

Functional

• Identification of manual call points.
• Zone dedicated label and Zone dedicated LED indication for fire, fault, disable.
• Detection for removed fire detector.
• Automatic reset of the fault warning condition.
• Logical “AND” scenario for fire detection lines.
• EN54-2 Disabled condition and Test condition per fire detection line and fire alarm line.
• Direct mode (skip delay) function for each fire detection line.
• Test-LED functionality.
• Built-in buzzer for fire and fault condition – one tonal, continuous, can be suppressed.
• Test mode for fire alarm lines.
• Input for remote Reset fires operation.
• 8 types optional scenarios for common fire outputs and fire alarm outputs.
• Optional delay time for fire outputs activation – 1,2,3,4,5,6 or 7 minutes.
• Evacuation condition – available on access level 2.
• Optional zone dedicated relay module FD4201, each relay is common fire output corresponding to the relevant fire detection zone.

Đặc tính kỹ thuật Trung tâm báo cháy 8 vùng UNIPOS PS4000-8

• Fire alarm lines:
  + Maximum number of fire detectors in a line: 32.
  + Connecting line: two-wire.
  + Maximum resistance of a line: 100Ω.
• Current thresholds for:
  + Fault condition: 0 – 6 mA.
  + Duty mode: 6 – 16 mA.
  + Fire condition: 16 – 80 mA.
  + Short circuit: > 80 mA.
• Monitored outputs for fire condition:
  + Number: 2 pcs.
  + Type: potential, relay with independent control.
  + Electrical characteristics: (19-27.5)VDC/1A.
• Relay outputs for fire condition:
  + Number: 2 pcs.
  + Type: potential-free,1 switching, 1 NO.
  + Electrical characteristics: 3А/125V AC, 3A/30V DC.
• Relay output for fault condition:
  + Number: 1 pcs.
  + Type: potential-free, switching.
  + Electrical characteristics: 3А/125V AC, 3A/30V DC.
• Relay output for fault condition:
  + Number: 1 pcs.
  + Type: none-monitored type activated on short-circuit (from potential free contact).
  + Electrical characteristics: 5 VDC on normal open state/ 0 VDC in activation mode.
• Performance:
  + Control over fire alarm lines and controllable outputs for fault conditions (short circuit and interruption) and automatic reset.
  + Detection of removed fire detector and automatic reset.
  + Identification of manual call points.
  + LED indication for alarm state and emergency.
  + Delay of outputs for fire condition with time period of 1, 2, 3, 4, 5, 6 or 7 minutes after fire condition is registered.
  + Option for ‘LOGICAL AND’ realization of two fire alarm lines.
  + Duty Mode condition with direct activation of Fire Condition 2nd Stage ” for two fire alarm lines.
  + Status Indication of the device for data transmission RS485.
  + Option for switching on/off interface RS485 communication.
  + Built-in sounder for fire condition – one tonal, continuous, can be switched off.
  + Built-in sounder for fault condition – one tonal, discontinuous, can be switched off.
  + Test mode for fire alarm lines.
  + Disabling fire alarm lines.
  + Disabling outputs for fire condition.
  + Expanding the options by means of extra relay outputs for fire condition for each line and built-in RS485 for operation in a local network.
  + Input for remote Reset fires operation.
• Indications of registered events:
  + Light indication: LED.
  + Sound: Built-in buzzer.
• Power supply:
  + Voltage: (100-240)VAC.
  + Frequency: 50/60 Hz.
• Backup batteries:
  + Battery type: lead, gel electrolyte.
  + Number of batteries: 2 pcs.
  + Nominal voltage of the backup battery: 12V.
  + Nominal capacity C20: (7,0) Ah.
  + Charge voltage: 28VDC.
• Operation in Duty mode upon interruption in main power supply:
  + Lines – 24V/ 1,2Ah – 24V/ 4,5Ah – 24V/ 7,0Ah.
  + 8 lines – 24 h – 98 h – 140 h.
• Consumption on backup batteries supply:
  + Configuration of 8 lines: < 45 mA at 24V DC.
• Power supply to external devices:
  + Voltage: (19-27)VDC.
  + Maximum current value (including current of contr.outputs): 1,2A.
• Fuses:
  + Main supply 230V: 4.0 A.
  + Backup battery: 6.0 A.
  + Power supply to external devices: 1.85 A automatic.
  + Monitored outputs: 1.1 A automatic.
• Dimension: 304mm x 222mm x 94mm.
• Weight (backup batteries not included): 0.98 kg.