- Sản phẩm chính hãng 100%
- Giá luôn tốt nhất
- Tư vấn chuyên nghiệp
- Giao hàng toàn quốc
- Bảo hành & sửa chữa tận tâm
Tủ báo cháy thường 4 zone Eaton Cooper EFBW4ZFLEXI
Liên hệ
Mô tả sản phẩm
• Cấu hình hệ thống dây điện vùng hoạt động như hệ thống dây điện thông thường hoặc bảng hai dây
• Có sẵn các biến thể 2, 4 và 8 vùng
• Cho phép kết nối một mạng thông thường hiện có hệ thống sang hệ thống BiWire
• Tương thích với EN 54-23 hai dây và thông thường thiết bị báo động trực quan được chứng nhận (VAD)
Những lợi ích
• Giảm lượng hàng tồn kho và cho phép hệ thống chữa cháy thích ứng với nhu cầu của khách hàng hoặc ứng dụng
• Đơn giản để bán và chỉ định, Flexi có thể được sử dụng rộng rãi nhiều ứng dụng và cài đặt rất đơn giản
• Tiết kiệm thời gian, tiền bạc và công sức khi thực hiện hệ thống tiện ích mở rộng và nâng cấp
Thông số kỹ thuật
Code | EFBW4ZFLEXI |
Description | 4 zone panel |
Power Specifi cation (2x MB512 batteries required. Batteries not included). | |
Input Voltage Range | 18.75-30.7V |
Maximum Current Drawn From Battery |
2.7A |
Zone Circuits | |
Number of Zones | 4 |
Devices Per Zone | • BiWire Mode: Max of 32 BiWire Detectors and Manual Call Points, total loading including BiWire sounders cannot exceed 200mA in alarm • Conventional Mode: Max 32 Conventional Detectors and Manual Call Points |
Maximum Loading per Zone | 200mA |
Standby Zone Voltage | Vmin 19V dc Vmax 23V dc |
Alarm Zone Voltage | Vmin 31V dc Vmax 33V dc |
Fuse Protection Per Zone | 250mA PTC |
End of Line Termination | BiWire Zones = EOLM-3 Only Standard Conventional Zones = EOLM-1 or EOLM3 |
Conventional Sounder Circuits | |
Number of Sounder Circuit | • BiWire Flexi 2 & 4 zone panels have 2 conventional sounder circuits • BiWire Flexi 8 zone panel has no conventional sounder circuits if all zones are in BiWire mode • BiWire Flexi 8 zone panel has 2 conventional sounder circuits if up to 4 zones are in conventional mode • BiWire Flexi 8 zone panel has 4 conventional sounder circuits if 5 or more zones are in conventional mode |
Maximum Loading Per Circuit | t 250mA |
Fuse Protection Per Circuit | 250mA PTC |
End of Line Termination | 6K8 Resistor |
Unmonitored Outputs | |
Fire, Fault, Interlink Relay | Type Volt-Free, Single Pole Double Throw Rating 30V DC, 1A Fuse 500mA PTC |
Auxiliary Output | V 18.15-30.7V Imax 50mA Fuse 50mA PTC |
Unmonitored Inputs | |
Class Change | Type Open Circuit = Normal Panel Operation Short Circuit = Activate All Sounders |
Communications Ports | |
Repeater Port (use of this port is outside the scope of EN54) |
Type RS485 Nodes 1 |
Environmental | |
Operating Temperature | -5°C to +40°C |
Relative Humidity | 93% +/-3% non-condensing |
IP Rating | IP30 |
Mechanical | |
Weight (excluding batteries) | 2.25kg |
Materials | PC ABS Front and Rear |
Cabling | |
Cable Access | 29 x 20mm drill positions – Slots for rear cable entry |
Cable Type | Firetuf FT120 / FP200 Cable type 2 core 1.5mm, screened fire rated cable, 500m (Max per zone) |
Compliance | |
Standards | EN54 Part 2 CIE & Part 4 PSE, BS5839-pt1 |
Đánh giá của khách hàng
Chưa có đánh giá nào cho sản phẩm này.